CHECK OUT CURRENT PROMOTIONS

Wall and Floor Drying Equipment and Accessories

Injectidry Wall Drying System The Injectidry HP System

The Injectidry HP is a positive displacement blower that forces air into or out of wall cavities under positive or negative pressure, drying walls faster than ever before from the inside out! Just drill 3/16” holes every 8” and insert the injectors. You can attain 40+ air exchanges per wall cavity in 60-90 lineal feet of standard wall. It's also terrific for drying beneath cabinets, hardwood flooring, and walls covered with watertight finishes like PVA paints and vinyl coverings. 

One unit does the work of 6 or more air movers and draws only 10 amps! 

More Info

  • 2 rolls of 3/8" x 1/2" x 200' PVC supply tubing
  • 50 Tubing Connectors
  • 50 Tubing Stoppers
  • 2 Small T’s
  • 1 Large Rolling Duffle Bag
  • 1 five foot 2" Main Supply Hose with 1 Quick Connect "T" attached
  • Pressure Relief Valve
    		•
  • 12 – 6 1/2' Sections Of Active Hoseline© with Hose Cuffs connected & ready for use
  • 16 Hose Connectors
  • 10 Quick Connect Inline Manifolds
  • 4 End Cap Plugs
  • 170 Wall Injectors
  • Manual and instructions
    		•

     

    ----------Injectidry Accessories----------

     

    Interceptor HEPA FilterThe Interceptor HEPA Filter

    In-Line HEPA filter for use with the Injectidry

    99.97% efficiency HEPA rating!

    The Interceptor is an inline HEPA filtering system for old and new Injectidry systems.  During negative drying, the 99.97% efficiency HEPA filter stops mold before it contaminates the air or the equipment.  The Interceptor features double gasket seals for complete filter sealing. 



    VAC-IT Panel System Vac-It Panel System

    Injectidry Systems introduces an innovative, non-destructive method for removing water from porous surfaces. The Vac-It Panels simplify set up and significantly reduce labor costs. The 30" x 46" panels are comprised of 8 sections that can be cut into smaller configurations to fit your small space drying needs. Perfect for drying hardwood floors, headers and plaster walls. (to be used with the Injectidry HP



     

    This universal air mover adapter allows for the delivery of large amounts of air cost effectively! It dries critical damaged areas such as walls, ceilings and cabinets using any air mover. The Direct-It™ IN allows you to dry up to 22 ft with one air mover and direct air in as many as 17 different areas at one time.