Unsmoke™ Wall Wash with Biosolv®

When cleaning fire and smoke-damaged walls, you need extra cleaning power. Unsmoke Wall Wash with Biosolv is specially formulated to remove soot and smoke residue from walls and hard surfaces.

Wall Wash is formulated with proprietary brightening and deodorizing agents for cleaning smoke-damaged hard surfaces. This product is especially effective for preparing walls for painting – removes and both wet and dry soot, and does not require rinsing: surfaces are ready to paint when product is dry!

A truly multi-use product, Wall Wash can also be used as a powerful degreaser for parts washing and as a carpet pre-conditioner for olefin carpets, and can be added to any cleaning agent to boost cleaning effectiveness and odor control.

Because this product deodorizes smoke odors, often no additional deodorizing is necessary. Walls come clean fast and are ready for painting in minutes. You save time, labor, and money.

Dilutions 

As a wall cleaner:  

1. Remove excess smoke and soot using a lambswool duster or HEPA vacuum.  
2. After testing the contamination level and surface durability, add 4 oz. and up to 32 oz. (125 to 1000 mL) to each gallon (3.8 L) of water depending on the severity of the job.  
3. Apply diluted Wall Wash with a wall cleaning machine, or spray on, and wipe down.  
4. Rinsing with water is recommended if used at higher concentrations, or if used to clean high-touch surfaces.   

As a booster:  

1. Mix 8 ounces (250 ML) of Wall Wash per gallon (3.8 L) to any ordinary cleaning solution for use on walls, floor or other hard surfaces.  
2. Rinsing with water is recommended if used at higher concentrations, or if used to clean high-touch surfaces.