Tramex CME5 Concrete Moisture Encounter

Need a moisture reading in concrete slabs, and need it instantly? Go with the easy-to-use and precise Tramex Concrete Moisture Encounter. This non-destructive device will also give comparative or equivalent readings other cementitious screeds, as well.

Take multiple tests over a large area in the shortest possible time with the Tramex CME5.

The Concrete Moisture Encounter detects and evaluates the moisture conditions within the slab or screed by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture present in the material. The Concrete Moisture Encounter determines the strength of the current and converts this to a moisture content value for concrete slabs and a comparative value for other cementitious floor screeds, displayed on a large clear analog dial.

Features:

• Non-destructive in operation with no need to probe, drill, or mechanically damage the surface
• Clear, easy-to-read analog dial
• Instant and precise readings to a depth of approximately  3⁄4" into the slab
• Bluetooth connection to accompanying IOS or Android App, allowing for continual development and integration of apps and reporting
• Hold function “freezes” meter reading when inspecting areas where the meter face is not visible, and for easy recording of data
• Reproducible and reliable results
• Spring-loaded contact pins compensate for uneven concrete and boost signal penetration
• Rugged, ergonomically designed enclosure

Operating procedure: 

To carry out tests, simply brush any dust from a smooth area of concrete and also from the electrodes, switch on the Concrete Moisture Encounter and place it firmly onto the surface, fully compressing the spring-loaded, signal-enhancing contacts on the base. Read the moisture content from the clear analogue dial. The Concrete Moisture Encounter is calibrated to give percentage moisture content readings on clean, bare dust free concrete floor slabs, with a depth of penetration of approx. ¾" (20 mm). Readings taken on concrete slabs through paint, coatings, adhesives, or other materials on the surface should be regarded as qualitative or comparative and not quantitative.