Miracle Sealants Company Tile & Stone Cleaner (6 PK)

Directions:

Tile & Stone Cleaner is concentrated and requires dilution.

To remove difficult stains such as oil and grease:

1. Mix one part Tile & Stone Cleaner with 3 parts hot water (cold water can be used but cleaning action will be reduced).
2. Apply Tile & Stone Cleaner with a clean mop or self-feeding floor machine.
3. Allow the solution to stand for 10 minutes while agitating periodically with the appropriate scrub brush.
4. DO NOT allow solution to dry on the surface.
5. Extract all the dirty remains with a wet vacuum system.
6. Rinse the surface thoroughly with hot water and allow to dry.

Difficult stains may require a second application. If area is still dirty after the second cleaning use Liquid Poultice, Phosphoric Acid Cleaner, Porcelain & Ceramic Tile Cleaner, or HDAC (Heavy Duty Acidic Cleaner) or as directed.

For general cleaning:

1. Mix one cup Tile & Stone Cleaner with 3 gallons hot water following the same instructions as before.

Heavy Duty Cleaning:

1. Use Phosphoric Acid Cleaner, HDAC, and Porcelain & Ceramic Tile Cleaner as directed.