SPEED‑MAXX™ Polishing Pad, 9"

When polishing high density overlays, conventional concrete, or terrazzo, SPEED-MAXX Dry Polishing Pads will produce a high polish in the lowest amount of time. Designed for dry use under multiple head, heavy weight floor grinders.

Made with abrasive resin segments bonded to a flexible backer then mounted to a non-woven nylon pad. This construction makes them easy to use with coarse hook drivers. The pads will produce a high polish with high clarity in record time. Single passes are normally all that is required. The abrasive segments are colorless so there is no color transfer to the floor.

The life expectancy for the coarse grits is around 10k sq ft per set of three with the coarse grits yielding a lower life than the finer grits.

USAGE:

Step 1: Prep the floor to desired level of aggregate exposure using metal bond tooling

Step 2: Remove scratch profile using transitional tools to bring the floor up to a 100g level

Step 3: Ensure scratch-free surface before proceeding

Step 4: Buff using hogs hair pad while simultaneously vacuuming

Step 5: Densify floor

Step 6: Start polishing process using SPEED-MAXX pads in sequence until desired gloss level achieved

These pads fit most common grinding machines.