SENTINEL Formula 539 Smoke & Odor Encapsulant in White

Before using products like Sentinel 539 Sealer/ Primer Odor Encapsulant to rid the space of unwanted odors, first clean dirt, grease, grime smoke and soot from floors, walls, ceilings and other surfaces

Preparation: Surfaces must be clean, dry, and free of loose debris. For best results the application area should be at least 60º F with humidity levels below 70%. Shake or stir 539 thoroughly before using. Stir product thoroughly prior to use to ensure proper coverage. Coverage rates range from 200 - 400 square feet per gallon, depending on the porosity of the surface being sealed.    

DIRECTIONS FOR USE: (FOR PROFESSIONAL USE ONLY.)

1. Apply Sentinel 539 using a brush, medium nap roller, or sprayer. Apply a thin uniform coat.  
   1. When spraying 539 mix contents thoroughly and use a .020 tip.
2. Allow 539 to dry thoroughly (a minimum of 120 minutes).  
3. If necessary, a second coat can be applied after first coat is completely dry.  
4. If spraying 539 in HVAC ducts or systems, allow to dry for 2 hours before recirculating fresh air.  
5. Fresh air should be carefully inspected for odors before ventilating into occupied spaces.  
6. The use of a NIOSH-approved respirator is recommended when exposed to spray mists or in areas of poor ventilation.