Manufactured for use with the HydraMaster HydraHoe wand, standard upholstery tool, RX20, and Rotary DriMaster. Is equipped with 1/4" fittings.

This stainless nipple is used in place of the brass nipple on the RX-20. Measures 1/8" male pipe by 4" in length.

This high-pressure quick connector is used to connect sections of either the Injectidry Active Hoseline or the Injectidry 1.5" Safety Yellow Blank Hose on Injectidry Wall Systems and the Injectidry Floor Systems.

O-ring kit for the HydraMaster valve. Contains three o-rings.