HydraMaster Quake HD Pre‑Spray

Commercial Carpet Cleaning:

Commercial carpeting can be made of any kind of fiber. If the fiber is olefin or wool, follow the tech helps for those particular fiber types. The main difference in cleaning commercial carpeting versus residential carpeting is that commercial carpeting tends to be more heavily soiled and has more greasy soils in it. To combat these heavy, greasy soils more powerful, higher pH solutions should be used. These solutions are not approved for stain-resistant carpeting.

Dilution:

• Pump-up sprayer: Mix 16 oz per gallon of water.
• Injection sprayer: Mix 4 qts quake to 1 qt of water in the 5-qt jug.

Recommended Basic Method:

1. Vacuum carpet thoroughly.
2. Dilute pre-spray (traffic lane cleaner) into a pump-up or inline sprayer, and spray onto all traffic lane areas.
3. Use a groomer to groom in the pre-spray and allow a 10-minute dwell time. Do not allow pre-spray to dry on the carpet.
4. Put diluted detergent into carpet extractor and clean carpet.
5. Apply 3M Scotchgard diluted at 32 oz per gallon of water to carpet with a sprayer.
6. Groom carpet to evenly spread protector onto all sides of the fiber.
7. Set air movers in room to speed dry carpet.