Bonnet Cleaning

Bonnet cleaning is an interim-maintenance program typically used in commercial cleaning situations. It is considered a low-moisture cleaning system. This process only cleans the face fibers; it does not get the deep down cleaning results from processes such as shampooing and hot water extraction.

Directions – Method 1:

1. Thoroughly vacuum the carpet.
2. Using a pump-up sprayer, apply Matrix Brite Look Bonnet Cleaner diluted at 32 oz/gallon of water to the carpet.
3. Run a bonnet machine or a floor machine with a pad driver and carpet bonnet over the carpet. Flip the bonnet over or replace the bonnet as it becomes soiled.
4. The bonnet cleaning chemical will become a dry crystal upon drying. This crystal will be vacuumed away during daily maintenance.

Directions – Method 2:

1. Vacuum the carpet.
2. Take a carpet bonnet and dunk it into a mop wringer and bucket set filled with Matrix Brite Look Bonnet Cleaner diluted at 32 oz per gallon of water. Wring out the excess chemical.
3. Run a bonnet machine or a floor machine with a pad driver and pre-soaked carpet bonnet over the carpet. Flip the bonnet over or replace the bonnet as it becomes soiled.
4. The bonnet cleaning chemical will become a dry crystal upon drying. This crystal will be vacuumed away during daily maintenance.

Warning: Always test material for colorfastness, follow label directions, and never mix product unless specified in the label directions. Each situation reacts differently and results may vary.