HoldTight 102 Salt Remover/Flash Rust Preventer

HoldTight 102 is a water treatment for wet abrasive blasting, vapor abrasive blasting and ultra-high pressure blasting that decreases the water’s surface tension, allowing it to get into the profile of the surface and remove ALL contamination, including salts, abrasives, light oils, and greases. HoldTight 102 leaves behind zero unwanted residue, and evaporates with the water, providing a surface that is thoroughly clean and flash rust free for 72 hours or more to ensure a tightly adhered coating.

Features:

• Flash rust prevented for approximately 48 hours, often longer with no rain and temperature above 40°F (4°C)
• Surface salts including chlorides, sulfates, nitrates, and all other salts are generally undetectable after proper use
• Immediately soluble in water or hydrocarbon solvents such as mineral spirits and xylene
• Non-hazardous, non-toxic and non-flammable
• Biodegradable, colorless, and odorless
• Phosphate and acid-free
• Evaporates with the water in which it is dissolved; the surface can be primed immediately after evaporation
• Components FDA approved for food grade service - 21 code of Federal Regulations 178.3400

Suitable Substrates:

• Steel, Iron, Galvanized Steel, Aluminum, and Stainless Steel
• Concrete and CMU Block (cinder block)
• Fiberglass