Centrifugal Air Movers

Shop centrifugal air movers, where power meets precision in air circulation. Sometimes referred to as "snail shells" or turbo dryers, these commercial fans produce powerful, focused air movement. They can be used to speed-dry floors or even to "float" wet carpet during floodwater restoration jobs. Trust Jon-Don for high-quality air movers—all purchases are backed by the industry's best guarantee!

List
sort-descending
Dry Air Tempest® Two‑Speed Air Mover
Dry Air SKU# DA-T-EA
You would have to look hard to find a feature missing from this air mover! You get a powerful 0.4 HP motor, 2 run speeds, stackable design for storage and transport ease, plus shock-absorbing polyethylene housing for corrosion reduction. The Tempest tilts at both 45- and 90-degree angles for fast drying.
$317.00
Ships Direct From Manufacturer.
Dry Air Typhoon® Three‑Speed Air Mover
Dry Air SKU# DA-TY-EA
The Typhoon offers a powerful 0.4 HP motor with 3 run speeds for all your drying challenges. Best of all, it only draws 3.0 amps! The two onboard GFCI outlets let you daisy chain multiple air movers, so you don't have to search for extra outlets. Just plug two fans into the Typhoon to eliminate the need for extension cords and power blocks.
Add to cart to see price
In stock
Dri‑Eaz Velo Pro Low‑Profile Air Mover Variable Speed
Dri-Eaz SKU# DP-VELOPRO-EA
The Velo Pro features the same space-saving design as the original Velo PLUS variable speed control and digital amp readout, allowing you to fine-tune the unit to one-tenth amp increments to maximize every circuit. With 5 operating positions, drying floors, walls, stairs, or crawlspaces has never been easier! 
$451.78
In stock
Dri‑Eaz TurboVent 48 InterAir Drying System
Dri-Eaz SKU# DP-F108-EA
The Dri-Eaz TurboVent 48 fits over the snout of your Dri-Eaz Sahara TurboDryer, redirecting the air over a 48-inch-wide column. This handy accessory is ideal for drying wet walls and ceiling cavities and boosts the effectiveness of your drying equipment.
SKU UnavailableNo Longer in Stock
Dri‑Eaz Velo Low‑Profile Air Mover
Dri-Eaz SKU# DP-VELO-EA
This compact air mover produces the largest drying area possible while taking up half the space of traditional snail shells and drawing just 1.9 amps! It's so light, a single tech can carry up to 4 units at once or up to 6 on a hand truck!
$388.07
In stock
Dri-Eaz Sahara Pro X3 TurboDryer Air Mover
Dri-Eaz SKU# DP-SPX3-EA
Professional restorers will find everything they need in the Sahara Pro X3: lower amp draw, 3 speeds, daisy chain capability, plus legendary Dri-Eaz durability and reliability.
SKU UnavailableNo Longer in Stock
Injectidry Direct‑It “IN” Universal Air Mover Adapter
Injectidry SKU# OE-IDI17-EA
The Direct-It “IN” Universal Air Mover Adapter gives you the ability to dry critically damaged areas fast! This handy accessory attaches to most standard centrifugal air movers, and allows you to direct air in as many as 17 different locations and dry up to 22 feet!
$738.00
In stock
Phoenix Stackable CAM Air Mover
Phoenix SKU# PH-SCAM-EA
The Phoenix Stackable CAM utilizes an innovative stable, stackable design. With multiple contact points and interlocking side grills, the Phoenix Stackable CAM can be stacked safely and securely up to 4 units high, freeing up valuable space in your trucks and warehouses.
SKU UnavailableNo Longer in Stock
Dry Air Tempest® Multi‑Speed Air Mover with Handle
Dry Air SKU# DA-TH-EA
The Tempest features a powerful 0.4 HP motor, 2 run speeds, and a convenient stackable design for storage and transport. This model also features an easy-carry retractable handle built right into the unit, so you can easily move it around the job site.
SKU UnavailableNo Longer in Stock
Dri‑Eaz TurboVent InterAir Drying System
Dri-Eaz SKU# DP-F200-EA
The TurboVent InterAir Drying System from Dri-Eaz is a handy air mover accessory that will help you dry difficult areas, such as cabinets, cupboards, and walls. Simply attach it to your Sahara air movers and begin ducting air into three different areas at once.
SKU UnavailableNo Longer in Stock
Dri‑Eaz Sahara HD TurboDryer Air Mover
Dri-Eaz SKU# DP-SPHD-EA
The Sahara HD TurboDryer from Dri-Eaz gives professional restoration contractors the static pressure needed to power through specialty drying challenges, such as drying in walls, underneath cabinets, and inside crawlspaces.
SKU UnavailableNo Longer in Stock
LPA‑1000 Low Profile Air Mover
Provided by Jon-Don SKU# OE-LPA2...
A lightweight commercial air mover that gives you intense drying power in a compact package. Redesigned for a sleek appearance, the LPA-1000 Air Mover is easy to carry, easy to store, and easy to use. It is not stackable with older LPA-1000 model air movers.

Starting at $279.97

In stock
Phoenix CAM Centrifugal Air Mover
Phoenix SKU# PH-CAM2-EA
Low amp draw, balanced airflow, and maximum velocities of 2,700 FPM are the foundation on which the Phoenix CAM Centrifugal Air Mover is built, along with a body durable enough to stand up to the rigors of the restoration industry.
SKU UnavailableNo Longer in Stock
Dry Air Universal Air Mover Clamp
Dry Air SKU# DA-CLAMP-EA
The Dry Air Technology Carpet Clamp uses a unique over-center locking system. Once engaged, it will not let go until the technician removes it. It also features an adjustable soft rubber boot that grips the carpet securely without the risk of damage.
$36.95
Ships Direct From Manufacturer.
Dri‑Eaz MAX Grip Carpet Clamp
Dri-Eaz SKU# DP-F349...
Looking for a solid, strong way to hold carpet to an air mover so it can be floated during drying? Get the MAXGrip Carpet Clamp from Dri-Eaz! Its innovative and easy-to-use design attaches to the Sahara Pro X3 and Sahara HD, securely holding but not damaging wet carpets during drying.
Add to cart to see price
Limited stock while supplies last!
Phoenix Stackable CAM Pro Centrifugal Air Mover
Phoenix SKU# PH-SCAMPRO-EA
Low amp draw, balanced airflow, and maximum velocities of 2,800 FPM are the foundation on which the Phoenix CAM Pro Centrifugal Air Mover is built, along with a stackable body durable enough to stand up to the rigors of the restoration industry.
SKU UnavailableNo Longer in Stock
Dry Air Typhoon® Three‑Speed Air Mover, Teal
Dry Air SKU# DA-TYTEAL-EA
The Typhoon offers a powerful 0.4 HP motor with 3 run speeds for all your drying challenges. Best of all, it only draws 3.0 amps! The two onboard GFCI outlets let you daisy chain multiple air movers, so you don't have to search for extra outlets. Just plug two fans into the Typhoon to eliminate the need for extension cords and power blocks.
SKU UnavailableNo Longer in Stock
Raptor RAM1000 Air Mover
Abatement Technologies SKU# RP-RAM1000-EA
The highly portable RAM1000DBL air mover can provide high speed 2,850 FPM airflow using less than three amps. Up to 4 units can be daisy-chained together to operate on a typical 15-amp household circuit.
$341.03
Ships Direct From Manufacturer.
AM33 Centrifugal Two‑Speed Air Mover
Provided by Jon-Don SKU# RP-AM33-EA
The AM33 is a powerful air mover that offers two run speeds and draws just 2.9 amps on high. Plus with a dual GFCI outlet, you can daisy chain units together to maximize your drying power on a single 15-amp household circuit.
$178.57
In stock
Phoenix AirMax Radial Air Mover
Phoenix SKU# PH-AIRMX...
The Phoenix AirMax is a radial air mover with outstanding performance (925 CFM and 1.9 amps), as well as many superior features, including its exceptional ergonomics and compact size. This low-profile air mover measures 8 7/8" tall, 17" wide, and 20 1/2" long, and weighs a mere 21 lbs.

Starting at $379.00

In stock

20 Items

Real-World Knowledge Resource Center

  • Sign up for classes and training opportunities online or at a branch near you
  • Check out free how-to articles and technical tips prepared by our experts
  • Read our blog for the latest industry updates
See upcoming Webinars
Gain Real-World Knowledge