Chemspec® One Earth Carpet Cleaner and Rinse

For professional use only. Concentrate. Must be diluted for use. 

DILUTION INSTRUCTIONS FOR PRESPRAY:

• Add 6 ounces of concentrate with enough water to make one gallon of ready to use solution (47 mL/L). (20:1) Use cold tap water. 

DILUTION INSTRUCTIONS FOR RINSE AGENT:

• Add 2 ounces of concentrate with enough water to make one gallon of ready to use solution (16 mL/L). (64:1) Use cold tap water. 

USE INSTRUCTIONS: 

1) Preinspect/pretest/pretreat spots as needed. Post wet floor signs as needed.

2) Vacuum the carpet thoroughly. 

3) Apply RTU solution at the rate of 200 square feet per RTU gallon (5 square meters per liter). Use a coarse spray and avoid generation of fine mist. Avoid overspray on surfaces not being cleaned. 

4) Allow adequate 10–15 minute dwell time. Do not allow RTU solution to dry on the carpet. 

5) Rinse extract with 1:64 solution and cold water. 

6) Use sufficient airflow to assure that the carpet will dry quickly. The AirPath™ airmover is recommended because of its 360-degree high-velocity airflow. 

FOR LOW MOISTURE CLEANING PROCESSES:

• Add 2 ounces of concentrate with enough water to make 1 gallon (64:1). Use cold water.