Chemspec® Kill Odor Plus, Spring Fresh

Dilution:

• For use as a heavy-duty Spot Remover (including old urine) - Do not dilute

• For use as a Spot and Odor Remover (including urine) - Dilute Kill Odor Plus with 4 parts cold water (32 oz Kill Odor Plus to 1 gallon cold water)

• For use as a Traffic Lane Cleaner and Encapsulation Cleaner - Dilute Kill Odor Plus with 10 parts water (12 oz. Kill Odor Plus to 1 gallon water)

• For use in restrooms:
  • For restroom restoration - Dilute Kill Odor Plus with 8 parts cold water (16 oz Kill Odor Plus to 1 gallon cold water)
  • For daily maintenance - Dilute Kill Odor Plus with 16 parts cold water (8 oz Kill Odor Plus to 1 gallon cold water)

Directions for Use on Carpet:

Spot Removal

1. Blot and agitate the spotting solution.
2. Allow 5 minutes dwell time, and then extract or rinse with DFC105 mixed with water.

Heavily Soiled Traffic Lanes

1. Pre-spray area to be cleaned at a rate of 200 - 400 sq ft per gallon.
2. Agitate Kill Odor Plus throroughly into the carpet's pile.
3. Allow 10 minutes of dwell time, and then extract with an extractor using hot water and DFC 105 in the machine.

Interim Cleaning - Encapsulation Process

1. Pre-spray area to be cleaned at a rate of 1,000 sq ft per gallon.
2. Agitate the pre-spray thoroughly into the carpet's pile.
3. Allow Kill Odor Plus to dry before vacuuming.

Hot Water Extraction Process

1. Pre-spray area to be cleaned at a rate of 1,000 sq ft per gallon.
2. Agitate Kill Odor Plus thoroughly into the carpet's pile.
3. Allow 10 minutes of dwell time, and then extract with an extractor using hot water and DFC 105 in the machine.
4. Hot water extraction should be used a minimum of every fourth (4th) encapsulation cleaning. (More dwell time will be beneficial when strong odors are present.)

Directions for Use in Restrooms:

Restoration:

1. Mop tile and grout liberally, especially around urinals and toilets.
2. Allow 10 minutes dwell time, and then scrub the floor paying particular attention to the areas under and around the urinals and toilets.
3. Rinse the floor using a clean damp mop and fresh cold water.
4. Allow the floor to dry before putting the restroom back into service. (More dwell time will be beneficial when strong odors are present.)

Daily maintenance:

1. Mop tile and grout liberally, especially around urinals and toilets.
2. Allow 10 minutes dwell time, and then rinse the floor using a clean damp mop and fresh cold water.
3. Allow the floor to dry before putting the restroom back into service.