Blastrac 1‑10DSGI Three‑Phase Shot Blaster, 230/460V

Strip, Clean, and Profile in One Easy Step!

This Walk-Behind Self-Propelled Shot Blaster Is Ideal for Medium and Large Jobs!

Easy Surface Prep in One Step

The Blastrac 1-10DSGI is ideal for improving traction and skid-resistance as well as preparing concrete surfaces prior to the application of paint and coatings. It strips, cleans, and profiles both concrete and asphalt in one easy step for maximum labor and time savings.

Self-Propelled Design, Easy Operation

The Blastrac 1-10DPS75 features forward and reverse self-propelled operation, which results in improved productivity plus a more even and consistent blast pattern and surface profile.

Consistent Performance—Even on Ramps and Inclines!

The Blastrac 1-10DSGI has an AC Inverted drive-motor with integrated brake, helps maintain speed on ramps and inclines, making it the ideal choice for restoring skid resistance and traction in parking garages or on warehouse floors. This also improves your productivity as it generates a more even and consistent blast pattern and surface profile.

High Productivity in a Compact Package

The Blastrac 1-10DSGI features a heavy-duty blast wheel drive system powered by a 15 HP motor with a belt drive and long-life bearing unit. With a 10” blast pattern, this unit can prepare up to 1,937 sq ft per hour, consuming abrasive at about 2 lbs per 100 square feet or 42 lbs per hour.  

A convenient slide-out screen in the shot hopper facilitates the removal of large debris, making it easy for the operator to clear obstructions quickly and efficiently.

Easy to Control, Easy to Transport

The Blastrac 1-10DSGI weighs 794 lbs, but transports easily to, from, and around the job site. The highly visible, easy-to-use control panel is located within easy reach. Even with minimal training, new operators can position the unit into place and start achieving great results.

Versatile Power Consumption

The Blastrac 1-10DSGI operates on 230V or 460V power thanks to an auto-sensing voltage-control motor. The 15 HP motor is UL certified for operator safety.

Perfect for Industrial and Commercial Jobs

The Blastrac 1-10DSGI is ideal for medium to large jobs in industrial settings, warehouses, factories, roads and bridges, retail stores, and supermarkets. This shot blaster is also suited for road and airport maintenance, asphalt blasting, decontamination, and more. 

Low-Dust, Cleaner Job Sites

When connected to the appropriate dust collector, the Blastrac 1-10DSGI operates virtually dust-free, ensuring you can achieve the desired surface profile while complying with OSHA dust regulations.

Key Specifications:

• Blasting Width: 10"
• Travel Speed: Up to 82 ft/min
• Productivity: Up to 1,937 sq ft  per hour on concrete
• Abrasive Consumption: 2 lbs per 100 sq ft / 42 lbs per hour
• Type: Backward (Pull)
• Blast Motor: 15 HP
• Voltage: 230V or 460V (dual voltage), 60 Hz
• Amperage: 21 amps (460V) | 39 amps (230V)
• Power Cord: 60 feet
• Dust Hose Connection: 5"
• Dimensions: 64" L x 18" W x 43" H
• Weight: 794 lbs

Note: Not available in all states. Call 800-400-9473 to check availability.