Default Category

Dri-Eaz

Dri‑Eaz TurboVent 48 InterAir Drying System

SKU# DP-F108-EA

The Dri-Eaz TurboVent 48 fits over the snout of your Dri-Eaz Sahara TurboDryer, redirecting the air over a 48-inch-wide column. This handy accessory is ideal for drying wet walls and ceiling cavities and boosts the effectiveness of your drying equipment.

SKU UnavailableNo Longer in Stock

Injectidry

Injectidry Vac‑It Panel Carry Bag

SKU# OE-ICB-EA

If you're tired of having Vac-Panels laying all over the place, then this heavy duty nylon carry bag is for you. Capable of carrying 10 Vac-It Panels.

$90.00

Ships Direct From Manufacturer.

Injectidry

Injectidry Silencer

SKU# OE-IDS60SIL-EA

The Silencer is made of ABS plastic and quiets the drying system by about 25%. It reduces some of the impeller noise in addition to the air rush sound. Attaches to the 2-inch OUT trunkline and sets up in seconds.

$147.75

Ships Direct From Manufacturer.

Viking

Viking PDS‑21 Pressurized Wall Drying System

SKU# RP-PDS21-EA

While it may look like a traditional air mover, the PDS-21 is actually a self-contained wall cavity drying powerhouse that delivers hot air—up to 205°F—into difficult-to-dry areas, such as under sinks, behind cabinets, and under permanent furniture.

$883.95

In stock

Injectidry

Injectidry Direct‑It “IN” Universal Air Mover Adapter

SKU# OE-IDI17-EA

The Direct-It “IN” Universal Air Mover Adapter gives you the ability to dry critically damaged areas fast! This handy accessory attaches to most standard centrifugal air movers, and allows you to direct air in as many as 17 different locations and dry up to 22 feet!

$738.00

In stock

Provided by Jon-Don

The Aerator Wall Cavity Tool

SKU# RP-AERATOR-EA

The Aerator is designed for use in wall cavity drying. It creates a precise 5/8" hole in wet drywall leaving no debris to clean up. No longer back-breaking work, the process can be completed 15X faster than the traditional drill and vacuum.

$489.30

In stock

Viking

Viking PDS‑12 Pressurized Wall Cavity Dryer

SKU# RP-PDS12-EA

This NEW Pressurized Drying System with HEAT will QUIETLY improve dry times with ease. The PDS‑12 operating volume is very low and so it’s a NO BRAINER for occupied dries! No more homeowners shutting off your Pressurized Drying Systems in the middle of the night! This compact industry changing wall cavity dryer features the same drying capability as the performance proven PDS‑21, but with a VARIABLE SPEED control that provides the ability to dial in the exact airflow needed for different drying applications. The PDS‑12 will quickly and QUIETLY deliver dry heated air that is perfect for drying under sinks, behind cabinets and permanent furniture. The lightweight PDS‑12 features a convenient wrap around cord design and quick release nozzles for quick setup and tear down.

$493.00

In stock

CEP

CEP Temporary Power Distribution Box, 30 Amp, 6503GU

SKU# MP-99577-EA

The Temporary Power Distribution Box provides two separate 20-amp GFCI-protected circuits. It is ideal for use on job sites with very little available power. It easily connects to a 220V, 30-amp dryer outlet to break the power down into two usable 20-amp, 125V circuits.

$519.64

Ships Direct From Manufacturer.

Injectidry

Injectidry Wall Injectors, Replacement (100 PK)

SKU# OE-IM06A-EA

Package of 100 replacement wall injectors used on Injectidry HP60 and HP60-Plus Units.

$117.47

Ships Direct From Manufacturer.

Injectidry

Wall Penetrators, Replacement 5/8"

SKU# OE-IDINWP-EA

Package of 17 one-piece 5/8" Wall Penetrators for use with your Injectidry Direct-It Products.

$74.75

Ships Direct From Manufacturer.

Injectidry

Injectidry HP‑PLUS Floor Drying Package

SKU# OE-HPPLSFDP-EA

The HP-PLUS Floor Drying Package is the improved version of Injectidry's HP60i Floor Drying package. This unit is quieter (less than 60 dB), more powerful, and easier to set up than the original. You can use up to 12 Multi-Port or 20 8-Port Vac-It panels with an increase up to 30% in drying capabilities.

$5,492.00

In stock

Injectidry

Injectidry HP‑PLUS Wall and Ceiling Package

SKU# OE-HPPWCP-EA

The HP-PLUS Wall and Ceiling Drying Package is the improved version of Injectidry's HP60i wall and ceiling package. This unit is quieter (less than 60 dB), more powerful, and easier to set up than the original.

$5,379.00

Out of stock accepting backorders.

Dri-Eaz

Dri‑Eaz DriForce InterAir Drying System

SKU# DP-DF211-EA

Dry walls without damage! The Dri-Eaz DriForce InterAir Drying System dries almost anywhere: ceilings, behind cabinets, beneath built-ins, insulated walls, firewalls, & vinyl-covered walls. Can be used on positive or negative air pressure.

$3,207.00

In stock

Dri-Eaz

Dri‑Eaz Rescue Mat System

SKU# DP-F286-EA

The Rescue Mat System from Dri-Eaz enables professional restoration contractors to dry hardwood floors fast. Utilizing the power of a high-pressure blower, such as the DriForce, the Rescue Mat vacuums water vapor right through the surface of the floor.

$935.00

In stock

Dri-Eaz

Dri‑Eaz WolfPack Floor Drying System

SKU# DP-WP-EA

The WolfPack Floor Drying System from Dri-Eaz connects to the AirWolf air mover and directs airflow down along the floor, drying hardwood floors faster than ever. It easily adapts to any floor plan.

SKU UnavailableNo Longer in Stock

Dri-Eaz

Dri‑Eaz TurboVent InterAir Drying System

SKU# DP-F200-EA

The TurboVent InterAir Drying System from Dri-Eaz is a handy air mover accessory that will help you dry difficult areas, such as cabinets, cupboards, and walls. Simply attach it to your Sahara air movers and begin ducting air into three different areas at once.

SKU UnavailableNo Longer in Stock

Injectidry

Injectidry HP60 Floor Drying Package

SKU# OE-HP60FDP-EA

The Injectidry HP60 Floor Drying Package is designed specifically for floor drying. This setup is extremely quick, easy, and efficient for your typical floor drying needs.

$5,495.71

Ships Direct From Manufacturer.

Injectidry

Injectidry HP60i Wall and Ceiling Package

SKU# OE-IDS60-EA

Injectidry's high-pressure drying systems are specifically developed to target high risk areas of hidden moisture. The HP60i can be used with Vac-It Panels to quickly dry hardwood floors. Capable of drying over 100 linear feet of wall or ceilings.

SKU UnavailableNo Longer in Stock

Dri-Eaz

Dri‑Eaz AirWolf Air Mover

SKU# DP-AW-EA

The AirWolf provides an unbeatable combination of powerful CFM and strong static pressure. Optimized for use with the Dri-Eaz WolfPack hardwood floor drying system, this combo dries wood floors from the bottom out and can help avoid costly repair bills.

SKU UnavailableNo Longer in Stock

CEP

CEP Portable Power Distribution Center

SKU# MP-TPPC-EA

"The Box" Portable Power Distribution Center from CEP allows you to plug into a 220-volt electric range or dryer outlet and split the power into six 20-amp GFCI outlets ready to run your air movers, dehumidifiers and drying equipment.

$2,000.37

In stock

Injectidry

Injectidry Direct‑It Axial Adapter

SKU# OE-IDIA-EA

The Direct-It Axial Adapter connects to both axial fans and air scrubbers, allowing contractors to direct drying and scrubbing efforts into wall cavities and other areas in need of high air exchange rates. This easy-to-setup system gives you the ability to replace fewer walls, ceilings, and hardwoods.

SKU UnavailableNo Longer in Stock